Siser EasyPatterns Leopard Tan Heat Transfer Vinyl

Application instructions (home iron)

• Cut the material – do not mirror!
• Weed away excess material
• Apply TTD High Tack Mask
• Set the iron dial between Cotton and Linen
• Cover the design with kraft paper or a non-stick cover sheet
• Place on a flat, hard surface (an ironing board is not recommended)
• Press the iron with medium/firm pressure (do not slide the iron)
• Press each section of the design for 15 seconds
• If any areas of the design lift after application, replace the cover sheet
and press again for 10 seconds
• Peel the carrier hot or cold

Application Instructions (heat press)

• Cut the material – do not mirror!
• Weed away excess material
• Apply TTD High Tack Mask
• Preheat the garment for 2-3 seconds
• Apply the design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel the carrier hot or cold